Ghost 2 Immobiliser Installation
Installing the ghost 2 immobiliser is a quick and effective method of protecting your vehicle against theft. It connects directly to the vehicle's CAN data network, and is virtually undetectable.
Identify a constant source of power and a point for grounding. These wires must be properly shielded to prevent electrical shorts.
The prevention of theft
The Ghost 2 Immobiliser creates a unique PIN code using the electronic buttons on your steering wheel or the centre console. This makes sure that only you are authorized to start your car. Even if thieves are able to copy your keys or hack your car's system it will not be able to begin the car. It's also quiet and inaccessible to anyone trying to use it therefore you can be sure that no one will ever be aware that you've added an extra layer of security.
Another reason that it is so effective at stopping theft is its ability to stop your engine even if a burglar has managed to gain entry. This is achieved by utilising a secondary device called the Shadow that connects to your car's CAN data system and does not communicate over radio frequency, making it difficult for thieves to track or alter. The Shadow can also be linked to your vehicle's tracking/paging systems, permitting you to track its movements. It has an output that can be used to sound the siren if someone attempts to steal it.
It is essential to work in a well-lit area when working with wiring, to aid in identifying the right wires and to avoid any accidental disconnections or short circuits. Making sure you double-check and test the connections is essential, as well as protecting the wiring from the elements. Cable tie is a great way to tie wires together and secure them. This improves their appearance and decrease the possibility of them being disconnected when the vehicle is in operation.
It's also a good idea to mark the CAN H and L wires using labels or tape. A misidentification of their location could cause an electrical surge that could damage the immobiliser. Multimeters can be used to verify that the grounding and power source are supplying an uninterrupted 12V and a strong connection.
Easy to use
Ghost immobilisers will help keep your vehicle secure from theft. It stops key cloning, ECU swapping and other security threats and it can be paired with an iPhone app for easy monitoring and management. The app also sends notifications if your car has been altered. It will also assist you to locate your car when it is stolen.
The Ghost immobiliser can be operated without any special equipment. It is connected to the CAN system in your vehicle, and is programmed with an individual PIN code. It is activated by pressing the use of a series of buttons on your dashboard or steering wheel, or through the WeCar mobile application. The code must be entered to turn on the engine, so that thieves cannot just turn on your car and leave.
Installing a Ghost immobiliser is a simple process. But, it's essential to follow the directions to ensure that the systems of your vehicle are working smoothly. The first step is to unplug the battery. This will stop airbags from accidentally deployment and ensure safety. It's also crucial to work in a well-lit space to ensure that connections are precise and avoid making mistakes. To ensure a solid, reliable connection, it's important to use high-quality connectors or proper soldering.
The CAN H wire and the CAN L wire are required to connect your Ghost immobiliser with the wiring of your vehicle. Utilizing a diagram of the wiring in your vehicle determine these wires and find a suitable place to connect them. Label these wires with tape or labels to make them easier to recognize when installing.
It's a great idea to test your immobiliser after the connections have been made to ensure that it works correctly. It's also an excellent idea to test the Transport Mode, which disables the Ghost system and allows you to temporarily disable your security features. This is especially helpful in situations like transportation of vehicles or service. This feature is particularly useful if you have an older vehicle that requires its battery to be isolated for service.
Low-profile
Ghost immobilisers are an ideal method to stop theft in keyless entry cars and vans. It works by intercepting the vehicle's remote control signal and creating a barrier so that thieves can't breach it without the proper PIN code. It is a reliable and discrete method of protecting your vehicle, and insurance companies even recommend it to reduce monthly premiums. It's a low-profile and concealed system that can be located in your car's buttons. It doesn't feature LED indicators and is therefore almost unnoticeable by thieves.
In contrast to other security systems that are available, the Ghost immobiliser is linked to your vehicle's CAN data network instead of a key fob. This means that thieves will not be able to detect or disable the device via cutting wires and is impervious to tampering. This makes it much more difficult to steal your vehicle and is also an excellent option for older vehicles that are not equipped with a modern keyless entry system.
The installation of a ghost immobiliser can be completed by a professional, or you can do it yourself using the right equipment and materials. You'll need a few basic hand tools as well as a multimeter for checking electrical values, as well as insulation tape or cable ties to make sure your connections are secure and well-insulated. You should also disconnect your battery before starting, and make sure that all of the wiring is properly wrapped and insulated to avoid theft from thieves.
If you're not comfortable with doing your own immobiliser installation then you can ask an auto repair shop in your area to do it for you. They'll take care of everything from the initial inspection until installing the device and offer a guarantee if something goes wrong. They can answer any questions you have about the immobiliser, and help you decide if it's a best option for your vehicle.
The Autowatch Ghost 2 is a intelligent immobiliser that connects directly with the ECU of your car. This protects against key cloning, hacking, and relay attacks that are common among modern vehicles. It is TASSA-verified and offers the highest level of theft protection, which means you can drive safely.
TASSA verified
The Ghost immobiliser system is among the most effective methods to protect your vehicle from theft. It connects to the CAN data network of your vehicle and uses it to prevent your engine from starting without your PIN number. The system is inaccessible to thieves, making it a great alternative to a car alarm. You can change your PIN at any time, and only you will know. This guarantees the security of your vehicle.
A TASSA certified installer will complete the installation of Ghost Ghost system in a couple of hours at your home or place of work. You will also receive a free emergency card, installation certificate, and owner's manuals. They will also give you an in-depth demonstration of the device and ensure that you are satisfied with the service before they leave.
In contrast to other immobilisers, the Ghost is able to connect directly to your vehicle's CAN data network. This allows it to be fitted without cutting wires. It's also quiet, making it hard to detect by thieves. The system is programmed with a unique PIN code that you can change, which you can enter using the buttons on your dashboard and the steering wheel. This prevents anyone else from starting your car even if they own your key fobs.
Disconnect the battery before you begin installing an immobiliser ghost 2. This will prevent accidental deployment of airbags or short circuits. After the battery is disconnected, it's vital to follow the instructions in the user manual for connecting the immobiliser. car ghost immobiliser can also refer to online resources for additional guidance specific to your vehicle's model.
You should test the immobiliser following completion of it to ensure that it is working properly. You can accomplish this by entering the PIN code and trying to start the vehicle. Then, you should conduct regular tests on the immobiliser to make sure it's working correctly. This will allow you to detect any issues early and address them quickly.