How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning or hacking. It works by preventing the engine from running unless it is started using a PIN code, which can be up to 20 characters long.
It is not detected by thieves, who are unlikely to think about this additional layer of security. Certain systems come with an app which allows the owner to disable their immobiliser if they forget their PIN code or to use the service/valet mode.
Connecting the vehicle's CAN Bus
The Ghost 2 Immobiliser is a cutting-edge security system that can be integrated into your vehicle's ECU offering a secure line of defence against thieves. It is highly efficient and user-friendly. Learn Additional makes it an excellent addition to your vehicle's arsenal of security. But, as with any other anti-theft device, it is not 100% reliable and requires regular maintenance to ensure its operation. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial network that lets microcontrollers communicate with each other across short distances without the necessity of a central control unit. It is designed to multiplex electrical wiring in vehicles, saving on copper. It offers many advantages, such as the low cost and ease of use.
In most modern cars, the CAN protocol is used to communicate with various systems, such as the engine management system (EMS) transmission controller, steering module air conditioning controls, and more. It also transmits data from sensors including speed sensors and inputs to control different features of the car. The CAN bus is able to monitor the condition of these different components. It can stop the vehicle from starting if it is in an unsafe condition.
It is important to understand how the CAN bus operates and how it's secured. The CAN bus is an excellent method to enhance the features of your vehicle, but it's essential to safeguard it from hackers and other threats. Installing a firewall, and monitoring your CAN bus with software is the best way to achieve this.
Ghost2's secluded control unit is concealed in the car's wiring harness or dashboard, which eliminates the possibility of a criminal physically tampering with it. It is impossible to reset a PIN code or emergency code without access to the car.
You can enable Transport Mode when you have to surrender your vehicle for valet parking, service or any other reason. This feature disables both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only reactivate when the vehicle has reached 31 mph for a period of 15 minutes.
Creating a PIN code
The Ghost immobiliser is a powerful security system that protects your vehicle from theft. The revolutionary technology utilizes an PIN to shut down the engine of your vehicle and prevent it starting without the correct code or an authorized fob or mobile. The system's subtle design ensures the system is unnoticeable and offers unparalleled security against theft. The system is TASSA-verified and can save you significant amounts on your car insurance.
During the installation when you install the Ghost system goes into an learning mode that records the sequence of buttons pressed to generate your unique pin code. The installer will guide you through activating the system once the pin code is created. Once activated the Ghost system shuts down the vehicle's start motor until you enter a valid PIN or switch the vehicle to transport mode. This makes it very difficult for thieves or cloners who want to hack or duplicate the starter system of your vehicle.
It is simple to install an easy-to-install Ghost immobiliser, however, you must follow the detailed instructions included in the user guide to ensure proper performance. Basic hand tools will assist in making precise connections and a multimeter will aid in checking the electrical value. Insulation tape and heat shrink tubing can shield the wire from damage, while cable tie is essential to keep everything tidy and secure. Check the system on a regularly to spot any potential issues.
After the installation is completed it is crucial to make a final test of the system prior to turning on the ignition in your vehicle. Ghost immobilisers will re-arm themselves after 3 to 30 second, dependent on the model of the vehicle. The system also comes with an option for Service/Valet that allows you to temporarily disable the system while you are servicing your vehicle or parking valet.
The immobiliser can be hidden under the dashboard or the steering wheel. It is recommended to use a small bit of duct tape or paint to mark the CAN H and L wires so that you can easily identify them during testing. Additionally the CAN H and L wires must be connected to a source of power that is able to provide continuous 12V. It is crucial to verify the connections again after testing because an incorrect identification of these wires may cause system malfunction.
The system must be activated
A ghost immobiliser prevents the car from starting unless you press a few buttons in the vehicle, typically on the steering wheel, the door panel or the central console. The sequence is decided by the user and can be altered if necessary. Once the system is activated, it is not able to be disabled by thieves, making it a good option for anyone looking to safeguard their vehicle from theft.
The system is designed to be undetectable, which means it can't be detected by modern diagnostics or code-grabbing technologies. It also doesn't send out radio frequencies, which makes it even harder for thieves to detect the device.
If the device is located, it will stop the engine from running. It will also sound an alarm to scare the thief away. The device can be used to track the location of the car and assist police recover it in the event of theft.
If you are interested in a ghost-immobiliser get in touch with the experts at Car Specalist Customs to get a quote and discuss your options. We are fully certified to install a ghost immobiliser on your vehicle and will make sure that it is tucked away in a difficult-to-access area. We can also install other security measures, such as the kill switch and wheel lock to protect your vehicle from thieves.
Disarming the System
If you have an Ghost immobiliser that is fitted to your vehicle, it's essential to know how to disarm it. You can use this in case you forget your keys or your battery is dead. The system utilizes an individual PIN code that only you know, so the immobiliser will not be able to start your vehicle without entering this code. The easiest way to enter the code is to press a combination of buttons on your dashboard or the steering wheel. This is a simpler method than using the key fob and also stops anyone from copying your remote.
Ghost2 is noninvasive, unlike some aftermarket immobilisers that require cutting wires for installation. It also connects to the CAN bus system of your vehicle in order to function. Its most notable feature is its ability to bypass the engine without impacting your vehicle's normal functions, making it difficult for thieves to use signal boosters or clone your car key. Furthermore, it doesn't emit radio frequencies, so thieves aren't able to detect the system.
The Ghost system has the option of a Transport Mode that lets you temporarily disable security in situations like transportation or service. This is a great option when you need to lend your vehicle to someone without sharing the PIN number or if you want to secure your vehicle while driving it. Press the service button five times over two seconds to enable Transport Mode. The Ghost system will confirm activation using 5 signal indicators.
After you're done, make sure to save the emergency code in a safe location outside of your vehicle. If you ever get locked out of your car, you can call the technician or the company that installed the system, and they'll provide you with the code. If they are not able to contact you You can always try to contact an authorized dealer, but this will involve verification procedures and could incur additional costs.
This system is not just convenient, but it can also protect your vehicle from theft and lower cost of insurance. Many insurance companies offer reduced monthly premiums or even financial incentives for installing this anti-theft technology.